Alternative energy

Latest revision as of 10:33, 17 April 2015

This section is included because energy autonomy is important for community run communication networks.

• appropedia wiki for sustainablity and 'appropriate' technology
• 12volthandbook.pdf a text focusing on 12v systems for boats

wind

Many designs of wind generators are available. Magnets from microwave ovens can be used. These are usually set into resin to stop them flying off which can be very dangerous. Static coils and moving magnets get around the problem of needing brushes like in electric motors. The blades can be carved out of hard wood.

• scoraigwind hugh pigotts website
• pdf hugh pigott scoraig wind electric

pedal generators

car alternators have often been used but they are a bad choice as they give no voltage at low speeds and so needs gearing. Belts from tractors (UK supplier for the tractor belts) have been used between the rear bike wheel and the alternator. However DC motors give much better results. These can be bought new but are expensive. Car windscreen wiper motors could possibly be used.

tim's pedal generator using dc motor and cycle training stand (originally on leeds-alternative-energy wikispace which has now been deactivated).

hand generators from stepper motors

For a mini version, stepper motors from printers and other electromechanical devices will give AC power at very low speeds. It can be interesting to play with leds and turning the motor by hand. They have multiple sets of coils, to allow the printer to make high-precision movements, which is why they have so many connections, and you will need to experiment to find which pins can be connected together to a to a bridge rectifier of four diodes to give maximum DC output.

• generating electricity with stepper motors
• hack a week stepper motor generator

hub dynamos

Hub dynamos are small generators in the centre of a bike wheel, used to create power whilst cycling, which traditionally was done by a DC dynamo in direct contact with the tyre. They often produce AC and are usually used for powering lights, but can be used for other things too, such as amplifiers or radios.

• Hub dynamo wikipedia article
• Voltage regulated 5v bicycle dynamo light USB - plans for a circuit to give 5v DC output (like you get from a USB port) from the dynamo hub.
• Usb as a power source is a good text about powering various things using 5v USB. It is worth also mentioning that its possible to buy very cheap circuits for stepping up 3.7v lithium ion batteries (commonly found in mobile phones) to 5v. Meaning you can use batteries from any old phone to charge other phones or other devices. Could be useful on a long cycling trip.

Solar panels

Solar panels are a simple and robust power solution but their production is energy-intensive and polluting. They can be stolen quite easily but there are roumours that some contain hidden chips which can be used to track their position.

Maximum power point tracking (mppt) regulators are the more efficient but expensive. Normal regulators will allow the battery state to determine voltage which may not be the most efficient for the panel. MPPT regulators use a control circuit to 'search' for the voltage allowing the highest power output.

Note that with the right regulator it is also possible to charge 12v battery from 24v panel (eg: morningstar sunsaver mppt) or a 24v battery from 12v panel (eg: emponi sol1).

Of course when using solar panels it is better to use electrical appliances during the day when more power is available. The cheaper regulators will even cut out and stop charging the battery when the voltage goes too high (when its very sunny), so its good to have something connected if this is the case.

• building solar panels from cells from damaged solar panels many people do this, the cells can be bought from solar panel manufacturers or online. but it is much work.

soldering without mains electricity

12v DC soldering irons, which can be run from batteries, are available. But for situations where you do not have enough power to use an electric soldering iron, a butane gas powered soldering can be used (eg:'Power probe'), which can be refilled just like a butane cigarette lighter. A simpler, but considerably less effective solution could be just to heat nails in a fire and use pliers to hold them for soldering.

It is also roumoured that pine tree sap can be used to make flux, which is used to make solder flow more freely.

• DIY flux comes straight from the tree | Hackaday

batteries

It is best to use 'deep cycle' or 'leisure' batteries rather than car batteries as they are designed to be dischared deeper. However car batteries can be used if they are the only thing available and it is the battery itself which will be damaged by discharging it, not the appliances you attach.

Often batteries can be improved simply by adding distilled water. Batteries which appear sealed can often be opened by forcing open a plastic panel to reveal little lids to the individual cells.

Old batteries which will no longer hold a charge can be often rejuvinated by pulse charging them to de-sulphate the cells, provided they have not shorted out as a result of a buildup of lead deposits in the bottom of the battery.

As a last resort, it is possible to use old car batteries which no longer will charge to 12v (which you often find discarded) as 9v batteries, which can power, for example, 3 led bike lights soldered together in series (2xAAA batteries=3v) to get the last bit of power from them.

Large 180ah truck-style batteries can often be found in tempory traffic lights used for roadworks. However there are roumours that these sometimes contain chips so that their location can be tracked if stolen.

Electric wheelchairs usually use very good sealed batteries. It could be a good idea to try asking at shops and companies who sell or service electric wheelchairs for old batteries.

Security and fire alarms also often have batteries as backup power, these can often be found in abandoned buildings or try asking manufacturers for old ones. They will power LED lighting for a useful amount of time and are small enough to carry in a rucksack to charge elsewhere, so perfect for when you have several people sharing one solar panel.

• lead acid battery information including plans for a pulse charger
• Battery regenerator wikipedia articlue
• bedini simplified schoolgirl battery restorer this is a more complicated motor system.
• bedini ssg battery restorer plans
• 12 volt gel cell charger plans
• Joule thief

alum batteries

Alum is the stuff deodourant stones are made from. It is also sold as a food additive used to keep pickles crisp. Apparently it can also be used as a water purifier. So it is less environmentally damaging than sulphuric acid. Some people (notably John Bedini) have reported emptying the acid from batteries and refilling them with alum solution. There is some controversy on internet forums about the advantages of alum batteries, it seems it is an area which needs further experimentation. Some say that:

• acid batteries discharge slowly to begin with, then at a greater rate. alum batteries reach a low voltage plateau where a small current can be taken for a suprisingly long time.
• Alum batteries have a lower power density than acid batteries. Meaning you need a heavier battery to get the same amount of power (a disadvantage). This makes than more suitable for static, long-term systems.
• Alum batteries charge faster than acid batteries.
• The terminals of alum battteries will never corrode (a common problem with acid batteries)
• Alum batteries can be discharged deeper without reducing their lifetime.
• Alum batteries have a longer lifetime. This can be because the lead is not corroded (eventually resulting in a short circuit caused by lead deposits). Also possibly because sulphation of the plates does not occur.

• Alum batteries
• youtube video making alum battery
• rexresearch.com Alum-Lead Battery Conversion
• blog.hasslberger.com How to convert a lead acid battery to alkaline

lighting

LEDs can be cheaper when bought in strips, for example 5630 SMD white LEDS can be bought in rolls of 5 or 10m, for 12v systems use multiples of 3 LEDs.

When using headtorches, remember when replacing the batteries that they discharge irregularly, the light will go dim when just one of the batteries is low, so test them with a volt meter and usually you will only replace one of them.

Thermoelectrical generators

Small heat powered electrical generators that can be attached for example to a wood burner. They dont produce a lot of power but could be useful for powering electronics stuff.

• thermoelectrical generator wikipedia article
• thermalforce.de site selling them
• video of TEG

wood

wood warms you three times. Once when you collect it, once when you chop it and once when you burn it.

• capturing heat 1
• capturing heat 2
• capturing heat 3

biofuels

• Algae fuel on appropedia

Electronics repair/salvage/desoldering

• sci.electronics.rapair repairfaq.org how to repair many things.

• car amplifier repair basics much information on this site
• ifitjams.com flow chart guides to repairing cars and computers

eco construction

Soon to be its own page.

earthships

ecoconstruction design by mike reynolds, using car tyres to collect the heat from south facing windows. The original three volume earthships book is available on library genesis

• earthship.com
• earthshipeurope.org organisation connecting earthship construction in europe
• 'The Earthship Toolkit. Your Guide to Building a Zero Waste Zero Energy Future' book by Susan Kemp and Paula Cowie based on building an earthship in Fife, Scotland.
• 'Earthships. Building a zero carbon futures for homes' by Mischa Hewitt and Kevin Telfer based on earthship built in Brighton.