Alternative energy
| Line 1: | Line 1: | ||
| + | |||
| + | windgenerators (pigott) brew. image in tatoo/collage | ||
| + | |||
| + | ==pedal generators== | ||
| + | car alternators often used but they are not ideal, they give no voltage at low speeds and so needs gearing, can use belt from tractors. [http://www.forge-services.co.uk/ UK supplier for the tractor belts] | ||
| + | |||
| + | [http://leeds-alternative-energy.wikispaces.com/timspedalgenerator tims pedal generator] using dc motor and cycle training stant | ||
| + | dc motors ideal and can be bought new but are expensive | ||
| + | car windscreen wiper motors could be used. as they are also dc motors. | ||
| + | need to regulate the voltage. | ||
| + | |||
| + | stepper motors. from printers etc will give power at very low speeds. interesting to play with leds and turning the motor by hand. they have multiple sets of coils. | ||
| + | |||
| + | |||
| + | mppt regulators. | ||
| + | |||
| + | for situations where you do not have enough power to use an electric soldering iron, a gas powered soldering can be used (they take expensive little cartridges). another solution could be just to heat nails in a fire and use pliers to hold them. | ||
| + | |||
| + | |||
| + | ==batteries== | ||
| + | |||
| + | it is possible to use old car batteries which no longer will charge to 12v (which you often find discarded) as 9v batteries, which can power, for example, 3 led bike lights soldered together in series (2xAAA batteries=3v). | ||
===gel cells=== | ===gel cells=== | ||
Revision as of 09:48, 18 May 2013
windgenerators (pigott) brew. image in tatoo/collage
Contents |
pedal generators
car alternators often used but they are not ideal, they give no voltage at low speeds and so needs gearing, can use belt from tractors. UK supplier for the tractor belts
tims pedal generator using dc motor and cycle training stant dc motors ideal and can be bought new but are expensive car windscreen wiper motors could be used. as they are also dc motors. need to regulate the voltage.
stepper motors. from printers etc will give power at very low speeds. interesting to play with leds and turning the motor by hand. they have multiple sets of coils.
mppt regulators.
for situations where you do not have enough power to use an electric soldering iron, a gas powered soldering can be used (they take expensive little cartridges). another solution could be just to heat nails in a fire and use pliers to hold them.
batteries
it is possible to use old car batteries which no longer will charge to 12v (which you often find discarded) as 9v batteries, which can power, for example, 3 led bike lights soldered together in series (2xAAA batteries=3v).
gel cells
12 volt gel cell charger plans
Thermoelectrical generators
Small heat powered electrical generators that can be attached for example to a wood burner. They dont produce a lot of power but could be useful for electronics stuff
- thermoelectrical generator wikipedia article
- thermalforce.de site selling them
- video of TEG
Other stuff
Power over ethernet would be usefull for data radio projects
